Feynlab Detailer V3 – 500ml

Detailer V3 – A super hydrophobic, durable, slick, glossy, spray-on and wipe-off maintenance spray, drying aid, and sealant. Protects coatings from water spotting during the curing process.

FEYNLAB® DETAILER is a 21st century version of a ‘quick detailing spray.’ Utilizing FEYNLAB’s® true nano technology, DETAILER contains water-based polymeric cleaning agents which cling to contaminants, removing them more thoroughly. After cleaning surfaces a durable layer of ceramic surface protection is left behind, adding gloss and significant hydrophobic properties. Detailer is an ideal product to protect ALL coatings on the market from water spotting during the curing process.

Product Benefits

A durable ‘paint sealant’ which doubles as a traditional quick detailing product. Use as stand-alone protection or to top automotive ceramic nano coating hydrophobic properties. An Excellent spot cleaner or drying aid to vehicle surfaces. Safe for all vehicle exterior surfaces: painted, plastic, rubber, and glass Completely water based, Detailer is completely Body Shop safe- – silicone free. Perfect final wipe product to protect all coatings from water spotting during curing.FEYNLAB’s™ true nano technology and bonding chemistry allows for an unparalleled level of protection since the formula penetrates further into the existing paint structure than anything else available.

Durability
3-4 months.

APPROVED SURFACES FOR APPLICATION ONLY: – DO NOT apply to unapproved surfaces

• Clear-coated painted surfaces (see warranty terms and conditions for approved manufacturers &vehicle types
• Black textured plastics
• Headlights & Tail-lights
• Black piano trim
• Clear-coated painted wheel rims & calipers

Included
500ml Bottle.

Cautions
Always wear respirator & gloves during application. Ensure application area is free of loose contamination.

Surface Preparation
Thoroughly clean surface of loose contamination or topical that might inhibit product effectiveness.

Directions 
Place vehicle in a well lit, cool, & contamination free environment.Thoroughly rinse vehicle of all loose dust, debris, and topical contamination — when possible. Clean all exterior vehicle surfaces with a PURE WASH for a traditional wash, or with PURE RINSELESS for a waterless or rinseless wash.

Application Instructions
Using a clean microfiber towel, apply DETAILER to the towel. Prime the towel with 3-5 sprays.For each section, the size of half a door or a quarter of a hood, apply 3-4 additional sprays to the towel. Spread evenly over the surface. Amount of product should be enough to evenly coat the area without over saturation. After applying, immediately, buff the area clear with another clean microfiber towel.

Recommended Maximum Area of Application
HALF of a door or 1/4 of a hood, then wipe off in same pattern as application. Inspect Carefully inspect all finished panels for  leftover residue during the final wipe. Commonly edges, emblems, and other tight areas may contain some remaining residue. Product residue is much easier to remove if caught soon after final wipe than later on.