Feynlab Pure Rinseless

Introducing Feynlab Rinseless V3: Your hassle-free solution to a sparkling clean car without the water wastage. No hose or running water required – just pure effortless cleaning. Our advanced polymeric cleaning technology tackles even the toughest gunk and grime, leaving your car gleaming with just a fraction of the water used in traditional washes. Plus, our pure formulation means no residue left behind with no fillers, waxes or polymers—just a happy car and an even happier planet!

Rinseless V3 is a versatile, eco-friendly solution designed for both professional and personal use, capable of cleaning all exterior vehicle surfaces. Here’s how to use Rinseless V3 for different cleaning methods:

PREPARATION

Ensure the vehicle is in a shaded area free of contaminants. If the vehicle is heavily soiled, consider a pre-rinse to remove loose debris and avoid scratching

WATERLESS WASH METHOD

• For a waterless wash, mix Rinseless V3 at a 1:125 dilution ratio. This means adding approximately 2 oz (or 60 ml) of Rinseless V3 to 1 gallon (or 7.5 liters) of water.
• Liberally spray the diluted solution onto the vehicle’s surface to encapsulate and lift dirt.
• Using a high-quality, plush microfiber towel, gently wipe the surface to remove contaminants.
• Follow up immediately with a dry, clean microfiber towel to remove any residual moisture.

RINSELESS WASH METHOD

• In a bucket equipped with a Dirt Lock® Car Wash Bucket Insert, mix Rinseless V3 concentrate with water at a 1:250 ratio, adjusting the amount based on the total volume of water used.
• For heavily soiled surfaces, consider an additional pre-soak step to loosen dirt.
• Clean the vehicle’s surface with a wash mitt or microfiber towel, employing the 8-sided folding technique to efficiently use clean sections of the towel.
• Wash from the top down and dry immediately with a high-quality microfiber drying towel.

RINSELESS WASH METHOD

• Create a quick spot cleaner solution at a 1:16 dilution ratio, translating to 8 oz (or 240 ml) of Rinseless V3 per 1 gallon (or 3.84 liters) of water.
• Spray directly onto spots or lightly soiled areas and wipe clean with a microfiber towel for rapid cleaning without the need for a full wash.

CLAY LUBE

• When used as a lubricant for clay barring, a stronger concentration is advisable.
• Mix at a 1:64 ratio, translating to 2 oz (or 60 ml) per 1 gallon (or 3.84 liters) of water. This higher concentration ensures sufficient lubrication to safely glide clay bars or mitts over the vehicle’s surface, encapsulating and removing embedded contaminants without causing marring.

SAFETY AND STORAGE

• Always use Rinseless V3 in a well-ventilated area and wear protective gloves and eyewear to avoid irritation.
• Store the product in a cool, dry place away from direct sunlight.
• Dispose of any waste materials according to local regulations to minimize environmental impact.